PRODUCTS
SHARPSHOT®
APPLICATIONS
(Click on each title to open)
SHARPSHOT® Iron Silicate Abrasives Safety Data Sheet (SDS)
SHARPSHOT® Technical Data Sheet (TDS)
SHARPSHOT® Pavement Aggregates and Fillers (SDS)
SHARPSHOT® Iron Silicate Roofing Granules (SDS)
SHARPSHOT® Iron Silicate Waterjet Abrasives (SDS)
CALPORTLAND Approval Letter
GSF Technical Data
GSF Color Retention Flyer
GSF Flyer
TDJ: BLASTOX® Technical Data
TDJ: Management of Paint Waste Residue
SHARPSHOT® Aquatic Test Lab Report
For ARTICLES on some of the applications for which iron silicate is an ideal choice, and for specific details about SHARPSHOT®, refer to the SHARPSHOT® Technical Data Page (TDS) in our LIBRARY.
WATERJET CUTTING
"Demand for decommissioning of platforms, pipelines and other subsea facilities has skyrocketed in the past few years with depletion of older oil fields and hurricane damaged areas." (Ranger Offshore)
Companies specializing in abandonment and decommissioning work have discovered that SHARPSHOT® 20x50 is an ideal product for their work. Many companies in the U.S. Gulf are already using SHARPSHOT® 20x50 for subsea structure removals.
SHARPSHOT® 20x50:
THE GENTLER, MORE COST-EFFECTIVE SOLUTION
Many companies use remote-controlled systems to dismantle oil rigs and other structures in deep water. The work they do often involves underwater abrasive waterjet cutting.
The abrasive is mixed with water under very high pressure to cut heavy steel structures.
For many years this kind of work was done with garnet or other expensive abrasives. Experience has shown that the hardness of the garnet often causes damage to expensive cutting equipment.
SHARPSHOT® 20x50 iron silicate has several advantages over garnet: it is more cost-effective and it is gentler on equipment.
Companies using SHARPSHOT® 20x50 instead of garnet save on the cost of abrasives, and also save by suffering less wear and tear on their equipment.
FOR MORE INFORMATION CONTACT:
Mike McLouth
Cell: 520-837-9289
mike.mclouth@mineralsresearch.com
SIZING & APPLICATIONS INFORMATION
SHARPSHOT®
20x50 (COARSE)
The preferred size for underwater waterjet cutting applications.
CLICK on the SHARPSHOT® image to view full size.
PACKAGING & DELIVERY OPTIONS
All SHARPSHOT® products are available as follows:
BULK (in pneumatic blower trucks, bottom drop hopper trucks, rear dump
trucks, tandems, or rail cars)
BULK BAGS (3,000 lb. and 4,000 lb.)
75 lb. BAGS
50 lb. BAGS NEW!
Click here for directions from I-17 to our plant at 705 E. Birch St., Cottonwood, AZ 86326.

MINERALS RESEARCH, Inc. (MRI)
4620 S. Coach Drive
Tucson, Arizona 85714, USA
Sales Manager: Mike McLouth